OPINIONATED OMARCHY
TROUBLESHOOTING CORPUS
790
RECORDS
790
AUDITED
0
UNCHECKED
2388
SOURCES
LIVE
display-monitors low rare DISPUTE

Make brightness keys work on an all-in-one whose built-in screen is DP-1

omarchyomarchy-4hyprlandappleimacdesktopintelnouveau
AUDITED Audited against its sources and confirmed accurate. · checked against Omarchy omarchy 4.0.4-1 on 2026-10-05
AUDIT NOTE

Read bin/omarchy-brightness-display on 4.0.4-1: monitor_is_internal is still ^(eDP|LVDS|DSI)- and use_ddc_display sends every other named monitor to the DDC helper, which exits 1 when ddcutil finds nothing. FIXED BRIGHTNESS is the string at shell/plugins/panels/monitor/Panel.qml line 568. Issue #8015 is open and contains the iMac13,1 nouveau report with the exact transcript in the symptom, and a comment confirming the same on an Iris Pro 5200 iMac on i915 with the I2C slave address x37 is unresponsive line. The fix uses the same o.bind and hl.unbind pattern as the stock ~/.config/hypr/bindings.lua. The device name acpi_video0 is the one both reporters had. The Shift and Alt brightness variants still route to DDC and fail harmlessly, which the record does not claim to fix. Not exercised: no all-in-one available.

Symptom

On an iMac (or another all-in-one) running Omarchy, the brightness keys do nothing and the Display panel shows FIXED BRIGHTNESS with no slider:


$ omarchy-brightness-display; echo "exit=$?"
exit=1
$ hyprctl monitors -j | jq -r '.[].name'
DP-1

The backlight itself is fine: brightnessctl -d acpi_video0 set 50% changes the screen at once.

Cause

omarchy-brightness-display chooses between the kernel backlight and DDC/CI from the connector name alone. monitor_is_internal matches only ^(eDP|LVDS|DSI)-, and everything else is treated as an external monitor and sent to omarchy-brightness-display-ddc. All-in-ones wire the built-in panel to a DisplayPort connector, so it is named DP-1 or DP-3. A built-in panel does not answer DDC/CI (ddcutil detect reports I2C slave address x37 is unresponsive), so the script exits 1 even though /sys/class/backlight/acpi_video0 exists. Reproduced on an iMac13,1 with nouveau and on an Iris Pro 5200 iMac with i915. The regex is unchanged in 4.0.4-1 and on quattro as of 2026-10-04, and the issue is open.

Fix

**Confirm the routing is the problem:**


ls /sys/class/backlight/
hyprctl monitors -j | jq -r '.[].name'
ddcutil detect
brightnessctl -d acpi_video0 set 50%

A backlight device that works, a non-eDP name and no DDC/CI means this record applies.

**Rebind the keys to the backlight directly (Omarchy 4)**, in ~/.config/hypr/bindings.lua:


hl.unbind("XF86MonBrightnessUp")
hl.unbind("XF86MonBrightnessDown")
o.bind("XF86MonBrightnessUp", "Brightness up", "brightnessctl -d acpi_video0 set +5%", { locked = true, repeating = true })
o.bind("XF86MonBrightnessDown", "Brightness down", "brightnessctl -d acpi_video0 set 5%-", { locked = true, repeating = true })

The Display panel keeps showing FIXED BRIGHTNESS until upstream changes the routing. Only the keys are fixed here.

Verify

Press the brightness keys, then run cat /sys/class/backlight/acpi_video0/brightness. The value changes and so does the screen.

Sources

aio-builtin-panel-on-dp-fixed-brightness