OPINIONATED OMARCHY
TROUBLESHOOTING CORPUS
790
RECORDS
790
AUDITED
0
UNCHECKED
2388
SOURCES
LIVE
gpu-drivers medium common DISPUTE

AMD or Intel monitor capped at 4K@60 over HDMI, because HDMI 2.1 is not on the open drivers

omarchy-4archendeavouroscachyosmanjaroamdgpuintelhyprlanddesktoplaptop
CORRECTED An auditor found the fix wrong or incomplete and rewrote it.
AUDIT NOTE

The substance is excellent and directly wiki-sourced. Arch AMDGPU wiki line 650 reads "Due to licensing issues the mesa driver cannot support HDMI 2.1. You must use DisplayPort. If your display does not support DisplayPort, some users have reported success with converter devices that take DisplayPort input and output HDMI 2.1 signals". The record's quote is verbatim and even the active-converter recommendation is the wiki's own. The Lua is correct against the current Hyprland wiki: hl.monitor({ output, mode, position, scale }) is the documented signature, bitdepth is a real field (integer, 8 or 10), and both /sys/class/drm/card*-HDMI-A-1/modes and the nested card*/card*-HDMI-A-1 form resolve. One concrete defect: the diagnostic line comments the package as drm_info, but the Arch package is named **drm-info** (extra). drm_info is only the binary, and there is no drm_info package in extra or the AUR (only drm_info-git). Anyone who types the commented name gets 'target not found'.

The cause above was not rewritten and may still contain the error described. The fix below is the corrected version.

Symptom

"My 4K 144 Hz monitor (or LG C-series OLED TV) only offers 60 Hz over HDMI on Linux, but does 120/144 Hz in Windows on the same cable and the same Radeon card." hyprctl monitors all lists no mode above 3840x2160@60, or offers 120 Hz only with visibly degraded colour (text fringing) because it fell back to 4:2:0 chroma subsampling. Switching cables, ports, and mode strings changes nothing.

Cause

Not a bug and not fixable in config. The HDMI Forum refused to allow an open-source implementation of the HDMI 2.1 specification, so Mesa and the amdgpu kernel driver cannot implement Fixed Rate Link (FRL) signalling. The Arch wiki states it plainly: "Due to licensing issues the mesa driver cannot support HDMI 2.1. You must use DisplayPort."

The practical ceiling is therefore HDMI 2.0 bandwidth (18 Gbit/s): 4K@60 at 8-bit RGB, or 4K@120 only by dropping to 4:2:0. This affects every open driver, AMD amdgpu and Intel i915/xe alike. NVIDIA's proprietary driver is unaffected because it is a closed blob that ships its own HDMI implementation, which is why the same monitor behaves differently on an NVIDIA machine.

A related but separate symptom on the same page: chipmunk/double-speed or absent audio when a 4K@60 device is attached over HDMI, which is a handshake problem rather than a bandwidth one.

Fix

Identical to the original, with one package name fixed in step 1 (drm_info is the binary and the package is drm-info):

**1. Confirm you are actually bandwidth-limited rather than mis-configured.**


hyprctl monitors all                     # look at availableModes for the HDMI output
sudo pacman -S drm-info                  # package is drm-info; binary is drm_info
drm_info 2>/dev/null | grep -iA5 'HDMI'
sudo cat /sys/class/drm/card*-HDMI-A-1/modes
lspci -nnd ::03xx                        # AMD/Intel = affected; NVIDIA proprietary = not

If availableModes genuinely has no entry above 3840x2160@60, you are hitting the cap.

Steps 2 through 5 stand exactly as written. DisplayPort is the fix. An *active* DP-to-HDMI-2.1 protocol converter is the workaround for a display with no DP input (passive adapters and "HDMI 2.1 certified" cables do nothing). Otherwise pick your compromise explicitly with hl.monitor({ ... mode = "3840x2160@120" }) for 4:2:0, "2560x1440@144" for full colour at high refresh, or mode = "3840x2160@60", bitdepth = 10. Also check the display's own OSD for "Ultra HD Deep Color" if HDMI audio is double-speed or missing.

Verify

hyprctl monitors shows the intended refresh rate as active for that output. hyprctl monitors all | grep -A20 availableModes confirms what the link can actually carry.

Sources

amd-hdmi-2-1-capped-at-60hz