Stop HDMI audio crackling that started with the linux-omarchy 7.2.5 kernel
Issues #12131 (MacBookPro11,2, Crystal Well) and #12628 (Macmini7,1, Haswell-ULT), read in full, support the symptom, both log lines, the A/B against stock linux 7.2.3-arch1-3, and the userspace causes ruled out by measurement. The 7.2.6rc3 result is in #12131's comments, and a later 7.2.8-1 test build was also clean there. The record honestly leaves the regression's origin open. On this workstation /usr/share/omarchy/migrations/1789325478.sh writes exactly BOOT_ORDER="linux-omarchy, linux-omarchy-*, *, *fallback, Snapshots" into /etc/default/limine, keeps the old kernel installed, and says /etc/default/limine has priority over every drop-in. pacman -Qo /etc/default/limine reports no owner, and /etc/default/limine here carries that BOOT_ORDER line. limine-update (limine-mkinitcpio-hook 1.38.0) runs limine-install and then limine-mkinitcpio, so it regenerates the entries. The omarchy repo at pkgs.omarchy.org still serves linux-omarchy 7.2.5-3 on 2026-10-05, and both issues remain open. The Limine menu path matches #12131's description. Not exercised: no BOOT_ORDER edit or rebuild was run, and the Limine entry names could not be listed without root, so the exact match of the linux pattern rests on limine-entry-tool's documented BOOT_ORDER semantics and the migration's own use of the package name.
Changing BOOT_ORDER changes which kernel boots by default. Confirm the stock linux package is installed before editing, keep both kernels installed, and remember the Limine menu still lets you pick either one if the default fails to boot.
Symptom
After omarchy update installed Omarchy 4.0.4 and the new linux-omarchy 7.2.5-3 kernel, audio over HDMI or DisplayPort crackles, clips and distorts, and gets audibly worse while the mouse moves. The user journal floods with spa.alsa: hdmi:0p: (0 suppressed) snd_pcm_avail after recover: Broken pipe or PipeWire XRun! rate:1024/48000 delay:6, and pw-top shows the HDMI sink's ERR counter climbing several times a second. Analog and Bluetooth output on the same machine are clean. Reported on Intel Haswell machines (MacBookPro11,2 with Crystal Well graphics, a Haswell iGPU desktop).
Cause
A kernel regression in linux-omarchy 7.2.5-3 affecting the Intel display audio controller on these machines. Booting the stock Arch linux 7.2.3-arch1-3 kernel, which Omarchy's kernel migration deliberately leaves installed, removes it completely on the same userspace (PipeWire 1.6.8, WirePlumber 0.5.17). Reporters ruled out the usual PipeWire causes by measurement: forcing a 2048 quantum, granting realtime priority with rtkit, snd_hda_intel power_save=0 and CPU load all left the underrun rate unchanged. Whether the cause is an upstream 7.2.4 or 7.2.5 change or a linux-omarchy configuration or patch delta is not established. A linux-omarchy 7.2.6rc3 test build fixed it for one reporter, but as of 2026-10-04 the omarchy repo still serves 7.2.5-3. Omarchy's migration 1789325478.sh installs linux-omarchy and makes it the default by writing BOOT_ORDER="linux-omarchy, linux-omarchy-*, *, *fallback, Snapshots" into /etc/default/limine.
Fix
**1. Confirm the kernel and the symptom.**
uname -r # 7.2.5-3-omarchy
pacman -Q linux linux-omarchy
journalctl --user -b | grep -c 'snd_pcm_avail after recover: Broken pipe'
**2. Test the stock kernel once from the boot menu.** At the Limine menu, open the Omarchy entry and pick the 7.2.3-arch1-3 kernel version instead of the omarchy one. If HDMI audio is clean there, this record applies.
**3. Make the stock kernel the default (Omarchy 4).** /etc/default/limine is read with priority over every drop-in, and it is owned by no package:
grep BOOT_ORDER /etc/default/limine
sudo sed -i 's/^BOOT_ORDER=.*/BOOT_ORDER="linux, *, *fallback, Snapshots"/' /etc/default/limine
sudo limine-update
Only do this if pacman -Q linux reports the stock kernel as installed. Leave linux-omarchy installed so you can return to it.
**4. Go back when a fixed linux-omarchy ships.** Check the repo version after each omarchy update:
pacman -Si linux-omarchy | grep Version
Then restore the original order and rebuild:
sudo sed -i 's/^BOOT_ORDER=.*/BOOT_ORDER="linux-omarchy, linux-omarchy-*, *, *fallback, Snapshots"/' /etc/default/limine
sudo limine-update
Plain Arch: does not apply. The stock linux package did not show this regression in these reports.
Verify
After rebooting, uname -r reports 7.2.3-arch1-3 (or whichever stock version is installed), HDMI playback is clean while moving the mouse, and journalctl --user -b | grep -c 'Broken pipe' stays at 0 during playback.