Stop the mouse cursor turning fluorescent blue with night light on NVIDIA
Issue #13912 (open) states the symptom, the RTX 3060 Ti on nvidia-open-dkms 610.57.04 and 4.0.4-1, the CTM-not-reaching-the-hardware-cursor cause, and both workarounds the record gives (no_hardware_cursors = 1 and wl-gammarelay-rs). A comment there links the NVIDIA forum report on KDE Plasma 6, which supports the driver-side claim. The Hyprland config-options page defines cursor:no_hardware_cursors as an int with 0, 1 = don't use hw cursors, 2 = auto (disable when tearing), default 2, matching the record. ~/.config/hypr/looknfeel.lua is required by Omarchy's hyprland.lua, and Omarchy's own install/user/hardware/fix-nouveau-cursor.sh writes the same hl.config({ cursor = { no_hardware_cursors = ... } }) shape there, so the file and Lua form are right for Omarchy 4. Omarchy's bundled hyprland.md agent notes confirm Hyprland auto-reloads on save. The setting was not applied on this machine, which has no NVIDIA GPU.
Symptom
On an NVIDIA card, as soon as night light is on (Super+Ctrl+N), the mouse cursor's outline turns bright fluorescent blue over every window. With night light off the cursor looks normal. Reported with an RTX 3060 Ti on nvidia-open-dkms 610.57.04, Omarchy 4.0.4-1.
Cause
hyprsunset tints the screen with a colour transform matrix (CTM). On NVIDIA the hardware cursor plane does not receive that CTM, so the screen is warmed while the cursor keeps its original colours. Against the warmed background its edge reads as blue. The same driver behaviour has been reported on KDE Plasma 6, so it is at least partly in the NVIDIA driver and not specific to Hyprland. The issue is open.
Fix
**Use a software cursor (Omarchy 4, Hyprland Lua).** Add this to ~/.config/hypr/looknfeel.lua:
hl.config({ cursor = { no_hardware_cursors = 1 } })
Saving reloads Hyprland. 1 means never use hardware cursors. The default 2 turns them off only while a window is tearing.
**Hyprland before 0.55 (hyprlang):**
cursor {
no_hardware_cursors = 1
}
The reporter's alternative was to replace hyprsunset with a gamma-LUT client, wl-gammarelay-rs, because a gamma table does reach the hardware cursor. That means leaving Omarchy's night light toggle.
Verify
hyprctl getoption cursor:no_hardware_cursors reports 1. Turn night light on, and the cursor is tinted like the rest of the screen, with no blue edge.