Colours look too dark on an NVIDIA HDMI output at 60 Hz under Wayland
Arch wiki NVIDIA/Troubleshooting 'Wrong color space on 60Hz on Wayland with HDMI' gives the 1660 Super example, says there is no easy way to set the colour space on Wayland, and gives nvidia-modeset.debug_force_color_space=2 via kernel parameters or modprobe. modinfo nvidia_modeset on 610.57.04 here lists debug_force_color_space:uint, and the sysfs file is root-only, so the sudo cat verify is right. In open-gpu-kernel-modules the parameter is a global uint (0444) over enum NvKmsDebugForceColorSpace: 0 none, 1 RGB, 2 YUV444, 3 YUV422, values at or above 4 ignored, which supports the danger's 'applies to every output' and 'debug parameter'. The Omarchy drop-in matches /etc/limine-entry-tool.d/omarchy-defaults.conf, which uses +=. The parameter was not applied here and I did not reproduce the dark output.
It is a debug parameter, so its meaning can change between driver releases. Remove it after a driver update if colours look wrong in the other direction. It applies to every output the driver manages. The usual Omarchy drop-in cautions apply: += not =, and check df -h /boot before limine-mkinitcpio.
Symptom
On an NVIDIA card driving a monitor or TV over HDMI at 60 Hz, everything looks darker and more contrasty than it should, with crushed blacks, under Hyprland or another Wayland compositor. The same screen over DisplayPort, or on another OS, looks right.
Cause
The NVIDIA driver can pick the wrong colour space for some HDMI outputs at 60 Hz. The Arch wiki gives a GTX 1660 Super over HDMI as an example. Wayland compositors have no simple way to override the output colour space, so the workaround is the nvidia-modeset module parameter debug_force_color_space=2. It is present on current drivers: modinfo -p nvidia_modeset on 610.57.04 lists debug_force_color_space.
Fix
**Omarchy 4.** Add the parameter through your own Limine drop-in:
sudo tee -a /etc/limine-entry-tool.d/zz-local.conf >/dev/null <<'EOF'
# `+=` appends. A bare `=` would wipe Omarchy's own defaults.
KERNEL_CMDLINE[default]+=" nvidia_modeset.debug_force_color_space=2"
EOF
sudo limine-mkinitcpio && sudo limine-update && sudo reboot
**Plain Arch:** add nvidia_modeset.debug_force_color_space=2 to the kernel command line (systemd-boot options, or GRUB GRUB_CMDLINE_LINUX_DEFAULT then sudo grub-mkconfig -o /boot/grub/grub.cfg). The alternative is options nvidia_modeset debug_force_color_space=2 in /etc/modprobe.d/ followed by sudo mkinitcpio -P.
Also check the display's own setting first. Many TVs have an HDMI black level or RGB range option (Low or Limited against High or Full) that causes the same look.
Verify
sudo cat /sys/module/nvidia_modeset/parameters/debug_force_color_space # 2 once applied
Black and dark-grey steps on a test pattern, such as a gradient image in a browser, are distinguishable again, and colours match DisplayPort or another machine.