OPINIONATED OMARCHY
TROUBLESHOOTING CORPUS
790
RECORDS
790
AUDITED
0
UNCHECKED
2388
SOURCES
LIVE
power-suspend low common DISPUTE

Get fan speeds and motherboard sensors to show in 'sensors' on a desktop

archomarchyendeavouroscachyosdesktoplm_sensors
CORRECTED An auditor found the fix wrong or incomplete and rewrote it. · checked against Omarchy omarchy 4.0.4-1 on 2026-10-05
AUDIT NOTE

Checked against the Lm_sensors wiki raw text, the kernel it87 documentation and this machine. Held: sensors-detect --auto, /etc/conf.d/lm_sensors and lm_sensors.service, the ASRock NCT6796D-S force_id=0xd801 boards, the NCT6686D force=1 boards, the 5.16 note on acpi_enforce_resources, the pwmconfig message (line 135 of /usr/bin/pwmconfig), and the Omarchy 4 limine-entry-tool.d drop-in plus limine-mkinitcpio rebuild (/usr/lib/limine/limine-common-functions loads /etc/limine-entry-tool.d/*.conf). Wrong or incomplete: the Gigabyte branch is stale. docs.kernel.org/hwmon/it87 now lists IT8628E and IT8689E as supported by the mainline driver, so only the IT8686E still needs it87-dkms-git. The it87 modprobe force_id was given with no persistence, and the wiki's Gigabyte section says the lax parameter is needed there, which the record contradicted without saying so. The nct6683 example omitted the modules-load.d line the wiki pairs with it. The mainline it87 ignore_resource_conflict option, which the wiki also lists, is a narrower alternative to the global lax parameter. DKMS on Omarchy 4 builds against linux-omarchy-headers, which omarchy-other.packages installs. Nothing was loaded or installed here.

The cause above was not rewritten and may still contain the error described. The fix below is the corrected version.
RISK

acpi_enforce_resources=lax and it87 ignore_resource_conflict=1 let a native driver touch hardware the firmware also uses, which can conflict with the firmware's own access. Use them only after the driver reports an ACPI resource conflict. On laptops, read the lm_sensors wiki warning about sensors-detect before answering anything other than the defaults.

Symptom

On my desktop, sensors shows only CPU temperature (coretemp or k10temp), NVMe and GPU. There are no fan RPM readings, so fancontrol or CoolerControl finds no fans to control. pwmconfig says There are no pwm-capable sensor modules installed.

Cause

Motherboard fan and voltage sensors sit on a Super I/O chip, most often Nuvoton (nct6775, nct6683) or ITE (it87), whose driver is not loaded automatically. On some boards the chip ID is a variant the driver does not recognise without force_id. On some ASUS and Gigabyte boards the ACPI firmware claims the chip's I/O range, so the driver refuses to bind unless acpi_enforce_resources=lax is set. Since kernel 5.16 that is rarely needed for nct6775.

Fix

**1. Detect the chip and generate the module list** (safe with the default answers, so --auto accepts them):


sudo sensors-detect --auto
sudo systemctl enable --now lm_sensors.service
sensors

**2. If it names a Nuvoton chip, load the driver now and at every boot:**


sudo modprobe nct6775
echo nct6775 | sudo tee /etc/modules-load.d/nct6775.conf

Boards the wiki lists as needing more:


# /etc/modprobe.d/nct6775.conf   ASRock B650M Pro RS, B850M Pro RS, X870 Pro RS (NCT6796D-S)
options nct6775 force_id=0xd801

# /etc/modules-load.d/nct6683.conf   ASRock X870 Steel Legend, B650I Lightning (NCT6686D) with an AMD CPU
nct6683

# /etc/modprobe.d/nct6683.conf
options nct6683 force=1

**3. Gigabyte boards with an ITE chip.** The mainline it87 driver now supports the IT8628E and IT8689E, so try it first:


sudo modprobe it87
sensors

The IT8686E is supported only by the out-of-tree driver. DKMS builds it against your kernel headers: Omarchy 4 installs linux-omarchy-headers, and on plain Arch install the headers for your kernel (for example linux-headers). Then:


yay -S it87-dkms-git
sudo modprobe it87 force_id=0x8686
echo it87 | sudo tee /etc/modules-load.d/it87.conf
echo 'options it87 force_id=0x8686' | sudo tee /etc/modprobe.d/it87.conf

The wiki also lists force_id=0x8689 for B560 and 0x8628 for Z690 and B550 boards.

**4. Only if the driver refuses to bind** (sudo dmesg | grep -i -E 'nct6775|nct6683|it87|resource conflict' shows an ACPI resource conflict).

For it87, first try the driver's own narrower option and reload it:


echo 'options it87 ignore_resource_conflict=1' | sudo tee -a /etc/modprobe.d/it87.conf
sudo modprobe -r it87 && sudo modprobe it87

Otherwise add acpi_enforce_resources=lax to the kernel command line. The wiki says Gigabyte boards on the out-of-tree it87 driver usually need it.

Omarchy 4 (Limine and UKI, the command line is built into the UKI):


printf '%s\n' 'KERNEL_CMDLINE[default]+=" acpi_enforce_resources=lax"' \
  | sudo tee /etc/limine-entry-tool.d/sensors.conf
sudo limine-mkinitcpio

Plain Arch: add it wherever your bootloader keeps the command line, for example GRUB_CMDLINE_LINUX_DEFAULT in /etc/default/grub followed by sudo grub-mkconfig -o /boot/grub/grub.cfg. Reboot afterwards.

Verify

sensors lists a nct6798-isa-0290 (or similar) block with fan1: to fanN: RPM values, and ls /sys/class/hwmon/*/pwm1 exists.

Sources

sensors-shows-no-fans-superio-module-not-loaded