OPINIONATED OMARCHY
TROUBLESHOOTING CORPUS
790
RECORDS
790
AUDITED
0
UNCHECKED
2388
SOURCES
LIVE
power-suspend low occasional DISPUTE

Enable ThinkPad fan control so thinkfan can manage the fan

archomarchylaptopthinkpadlenovo
AUDITED Audited against its sources and confirmed accurate. · checked against Omarchy omarchy 4.0.4-1 on 2026-10-05
AUDIT NOTE

Checked against the Fan_speed_control wiki raw text, the AUR thinkfan 2.0.0-3 PKGBUILD and source files, the thinkfan 2.0.0 source on GitHub and this machine. thinkfan is AUR-only (no official repo result). The PKGBUILD installs /usr/lib/modprobe.d/thinkpad_acpi.conf containing options thinkpad_acpi fan_control=1, the example examples/thinkfan.yaml to /usr/share/doc/thinkfan/examples, and thinkfan.service. src/message.h carries the exact 'Fan_control seems disabled' text and itself suggests /etc/modprobe.d/99-thinkfan.conf. thinkfan.h defines /etc/thinkfan.yaml then /etc/thinkfan.conf as defaults and config.cpp tries YAML first, so copying the YAML example to /etc/thinkfan.conf as the wiki says works. The modprobe -r/modprobe reload, experimental=1 note, thinkfan -n and the disengaged note match the wiki. yay is in omarchy-base.packages and installed here. The initramfs branch correctly gives limine-mkinitcpio for Omarchy 4 and mkinitcpio -P for plain Arch. Omarchy ships nothing touching thinkpad_acpi or thinkfan. Not exercised: no ThinkPad here.

RISK

A wrong thinkfan config can keep the fan too slow and let the machine overheat. Test with thinkfan -n under load before enabling the service. Level disengaged runs the fan unregulated.

Symptom

On my ThinkPad, echo level 2 | sudo tee /proc/acpi/ibm/fan fails with Invalid argument or Permission denied, and thinkfan refuses to start with:


Kernel module thinkpad_acpi: Fan_control seems disabled.

The fan runs loud on BIOS auto control and I cannot change it.

Cause

thinkpad_acpi exposes /proc/acpi/ibm/fan read-only unless the module is loaded with fan_control=1. Some newer models also need experimental=1. The AUR thinkfan package ships /usr/lib/modprobe.d/thinkpad_acpi.conf with options thinkpad_acpi fan_control=1, but that only applies the next time the module loads. The module is already loaded from boot.

Fix

Install thinkfan from the AUR (yay ships with Omarchy):


yay -S thinkfan
pacman -Ql thinkfan | grep modprobe     # /usr/lib/modprobe.d/thinkpad_acpi.conf

If you do not use the package, set the option yourself:


echo 'options thinkpad_acpi fan_control=1' | sudo tee /etc/modprobe.d/99-thinkfan.conf

Reload the module so the option takes effect now:


sudo modprobe -r thinkpad_acpi
sudo modprobe thinkpad_acpi fan_control=1
cat /proc/acpi/ibm/fan     # 'commands:' lines should now list 'level'

If modprobe -r says the module is in use, reboot instead. If the module is built into your initramfs, rebuild it so the option is included: on Omarchy 4 sudo limine-mkinitcpio, on plain Arch sudo mkinitcpio -P.

Configure thresholds from the shipped example, test in the foreground, then enable the service:


sudo cp /usr/share/doc/thinkfan/examples/thinkfan.yaml /etc/thinkfan.conf
sudoedit /etc/thinkfan.conf
sudo thinkfan -n
sudo systemctl enable --now thinkfan.service

Verify

cat /proc/acpi/ibm/fan shows level: changing as thinkfan acts, and systemctl status thinkfan is active with no Fan_control seems disabled message.

Sources

thinkpad-fan-control-disabled-thinkfan